Audio Radar Issue: Why Does My Screen Stay or Flash Black?
If your screen is staying black or flashing, the issue is most likely related to HDMI cables or incorrect connections, rather than the Audio Radar unit itself.
Troubleshooting Steps
1. Check HDMI Connections
- Ensure that HDMI cables are inserted into the correct input and output ports.
- HDMI OUT from your gaming device (PC, Xbox, or PS5) → HDMI IN on the Audio Radar Command Center.
- HDMI OUT from the Audio Radar Command Center → HDMI IN on your TV or Monitor.
*If the cables are reversed, this will result in a black screen with no signal.
For step-by-step guidance, refer to the correct setup guide for your system:
2. Use High-Quality HDMI Cables
- Faulty or low-quality HDMI cables are the most common cause of a black or flickering screen.
- We recommend using HDMI 2.1 certified cables to ensure stable performance and compatibility.
- For recommended cables, see: What Do I Need?
If you've checked your HDMI connections and cables but the issue persists, please Contact Us for further assistance.
Related Articles
Audio Radar Issue: All Light Bars Flashing Together
There are two common causes for all of your Audio Radar light bars activating at the same time. This issue is most likely due to Mono Audio being enabled, which merges all sound channels into a single signal, or because your Audio Radar unit is in ...Audio Radar Full User Manual
For a comprehensive guide to setting up and using Audio Radar, refer to the full user manual. This detailed resource covers installation, configuration, advanced settings, troubleshooting, and maintenance tips to ensure optimal performance. Download ...Audio Radar Display Compatibility: Supported Monitors, TVs, and Screen Sizes
1. General Compatibility Audio Radar is designed to work with a wide range of displays, including flat, curved, OLED, and ultra-thin monitors and TVs. To ensure proper mounting and optimal performance, the minimum recommended screen size is 24 inches ...Audio Radar Troubleshooting Guide
Having trouble setting up or using your Audio Radar? Don’t worry—we’re here to help! This comprehensive step-by-step guide will walk you through the most common issues, providing clear instructions to get your system up and running smoothly. Let’s ...Audio Radar Issue: Only Front (Top) Light Bars Activating
If only the top two light bars of your Audio Radar setup are activating, this often indicates that your audio settings are set to stereo sound instead of 7.1 surround sound. Stereo sound only provides basic left and right audio channels, which means ...